Product Benefits

Efficient method of dispensing containers

Containers are dispensed without damaging or marking containers.

Variable speed controls allow you to match a secondary operation.

Highly mobile– locks into place when applied.

The 15 foot power cord plugs into standard wall socket.

Dimensional Drawings

Quality Construction

Depositor bodies are made from welded 2 inch steel structural tubing.

1 inch aluminum tooling plate provides a stable base for the depositor.

8" casters and locks provide increased mobility

Variable speed drive will dispense containers at speeds exceeding 120 containers per second.

Each Depositor is structured around our Stainless Steel Double Lead System

The leads are powered by a 1/2 horse three phase motor and right angle gear box.

The gears are completely enclosed with a Plexiglas shield for maximum safety to operator

Each depositor encompasses on our revolutionary stainless steel double lead system. The "Pickup" lead is used to separate the individual containers from the original stack, the second lead is used to rapidly pull the container away from the stack. This allows for the container to fall unhindered from the stack. The stainless steel lead is heat-treated to 50 Rockwell to reduce wear and increase life.

Steel miter gear and bearing drives: The mechanical movement of the leads is done through a series of quality miter gears which are supported by ground shafts and bearings. Standard components are used so that they can easily be replaced if maintenance is required. Guarding placed around the mechanical drives protect any user from being injured during operation.

Performance Guarantee

Each depositor comes with a performance guarantee. To insure this we require sample containers to be sent to our facility for the    testing of the depositor